Interactive interface is common breakdown and processing technique

  • Time:
  • Click:63
  • source:JUSTYN CNC Machining
The domain that always participates in man-machine information communication is existing man-machine interface. Current, man-machine interface HMI is having wide application in each domains, but in using man-machine face process, constant regular meeting encounters a lot of problems. Be aimed at these circumstances, the article summed up the breakdown that man-machine interface appears in routine middling and the method that its handle. One, man-machine interface is not had answer, by feeling any place are not had answer. Processing technique: Encounter this kind of situation, check each wiring interface to whether appear above all become loose, check next string together a mouth to reach interrupt date to whether have conflict, if cause, should adjust resource so, escape conflict. Next, whether does surface of examination man-machine interface appear interstitial, if send,existing break should change in time. In addition, still need to check man-machine interface surface to whether have dirt, if have, undertake keeping clear of with soft cloth. It is normal to observe the examination controls the indicator light on the box to whether work, normal when, indicator light is green, and twinkle. If the part above all normal, usable replace a law to check man-machine interface, replace control box first, replace feeling screen again, replace main engine finally. 2, man-machine interface is normal but computer cannot be operated. Interface of a man-machine, classics experiment its itself everything is normal, but receive on after lead plane, computer cannot be operated. Processing technique: To this kind of circumstance, the reason has 2. One of, the likelihood is version of man-machine interface driver too low, need installs newest driver. Secondly, the likelihood is start in lead plane lade before man-machine interface driver, man-machine interface controls card to receive operation signal, after needing to cut off the power afresh only, restart computer can. 3, feeling forbids. Interface of man-machine of sound wave of a surface, the place that touchs video screen with finger cannot complete corresponding operation normally. Processing technique: This kind of phenomenon has 2 kinds of reasons. The first kind of reflection stripe that may be sound wave screen gets slight destroy, if encounter this kind of circumstance criterion will not complete rehabilitate; may be interface of sound wave man-machine is after use period of time the 2nd kind, screen is enclothed by dirt above the reflection stripe all around, can undertake wiping with the soft cloth that works together, cut off the power next, start the computer afresh and new calibration. CNC Milling CNC Machining