Impurity of the solid in cutting fluid reachs the processing technique of hangover
Time:
Click:69
source:JUSTYN CNC Machining
In the use process of cutting fluid, the floater that often the metal machines manufacturer to give existing solid body appears in the phenomenon of cutting fluid surface. Affected the function of cutting fluid and service life thereby. Is there solid foreign matter in encountering cutting fluid so or should the problem of hangover manage like where? Above all, all cutting fluid can appear solid impurity or the problem of hangover, because the reason of the following respects is caused,be commonly. The first, of cutting equipment machine filter occurrence problem, equipment filterability can change to differ or damage, meet those who affect the impurity inside cutting fluid to discharge. Can filter through improvement or undertake settlement except broken bits system. The 2nd, the bacterium inside cutting fluid is progenitive and serious, produce foreign matter or hangover thereby, appear this one phenomenon should undertake to cutting fluid sterilization is handled in time. The 3rd, the water quality of cutting fluid dilute is excellent, use in cutting fluid long the impurity such as occurrence metal salt, appear this problem should change in time water quality perhaps uses the cutting liquid with fight hard water function good. The 4th, cutting fluid used time to grow, have other equipment oil, the foreign matter interfuse such as slideway oil arrives in cutting fluid, appear thereby foreign matter, answer to undertake in time is in oily processing. Additional, in operating a worker to machine a process in the metal, occurrence epinosic circumstance, everywhere throws rubbish, in making a few rubbish drop cutting fluid not carefully, also can use the issue of occurrence impurity of surface of metallic cutting fluid. Accordingly, the cleanness that should do good metal job shops works, remind jockey the person notices to maintain systematic cleanness. CNC MillingCNC Machining